Representative image. Dimensions are given in the technical table.
AISI 316 Stainless Steel Sheet
AISI 316 sheet, produced in 0.85–2 mm thickness to custom dimensions with protective PVC film.
Unit weight: 6.80–16.00 kg/m² · 10 m² ≈ 68.00–160.00 kg
Technical Specifications
| Thickness | 0.85–2mm |
|---|---|
| Unit Weight | 6.80–16.00kg/m² |
| Material Grade | AISI 316 / EN 1.4401 |
| Density | 8g/cm³ |
Dimensions are the product's declared geometry. Contact us for tolerances, surface finish and delivery standards. Weights are calculated from those dimensions.
Where this product is used
The jobs this form most often goes into:
Commercial Kitchen Fabrication
In a commercial kitchen the surface gets wet and washed; 430 is not suitable for wet areas or food contact, so use 304 (Cr 17.5–19.5% · Ni 8.0–10.5%). Tops are folded from sheet, legs and frames made from 15×15–80×80 mm profile, shelf supports from Ø16–76.1 mm tube. Send the grade and size and we'll cut it to length.
Typical grade: AISI 304 / EN 1.4301
View details
Food and Beverage Plants
Product-contact lines are washed often; the general answer is 304 (Cr 17.5–19.5% · Ni 8.0–10.5%). For salty or acidic cleaning, 316 (Mo 2.0–2.5%). Transfer lines are made from Ø16–76.1 mm tube, platform and stair frames from 15×15–80×80 mm profile, tank shells from sheet. Send the grade and size and we'll cut it and ship.
Typical grade: AISI 304 / EN 1.4301 · AISI 316 / EN 1.4401
View details
Chemical and Water Treatment
On a line carrying aggressive fluid, 304 pits wherever chlorides are present. 316 is chosen for this environment (Mo 2.0–2.5% · Ni 10.0–13.0%). Lines are made from Ø16–76.1 mm tube, tank linings from sheet. Send the fluid and the size and we'll confirm the grade together.
Typical grade: AISI 316 / EN 1.4401
View details
Wet Areas and Drainage
430 is not used on permanently wet floors; wet areas are outside its range. Channel bodies are folded from 304 sheet (Cr 17.5–19.5% · Ni 8.0–10.5%); where the water is chlorinated or salty, 316. Gratings and supports are made from 15×15–80×80 mm profile, drain lines from Ø16–76.1 mm tube. Send the grade and size.
Typical grade: AISI 304 / EN 1.4301 · AISI 316 / EN 1.4401
View details
Automotive and Transport
Trailers and bodies are exposed to road salt and damp; 430 is not suitable outdoors. 304 for frames and fittings, 316 (Mo 2.0–2.5%) on salted roads and coastal routes. Body frames are made from 15×15–80×80 mm profile, inner and outer cladding from sheet. The listed profiles have a wall thickness of 0.5–1.5 mm; let's check any load-bearing spot together.
Typical grade: AISI 304 / EN 1.4301 · AISI 316 / EN 1.4401
View details
Machinery and Industrial Fabrication
For machine housings in dry interiors, 430 (Cr 16.0–18.0%) is suitable; where there is washdown or damp, use 304. Covers and panels are folded from sheet, frames made from 15×15–80×80 mm profile, fluid lines run in Ø16–76.1 mm tube. Choose 304 for welded frames: 430 welds less well than 304. Send the grade, size and quantity.
Typical grade: AISI 304 / EN 1.4301 · AISI 430 / EN 1.4016
View details
Energy Plants
The auxiliary lines of an energy plant (cooling and process water, cable supports, guards) run in damp conditions; the general answer is 304 (Cr 17.5–19.5% · Ni 8.0–10.5%). On chlorinated or salty water lines, 316 (Mo 2.0–2.5%). Water lines are made from Ø16–76.1 mm tube, cable supports from 15×15–80×80 mm profile, guards from sheet. Send the line type and size and we'll pick the grade together.
Typical grade: AISI 304 / EN 1.4301 · AISI 316 / EN 1.4401
View details
Marine and Port
In salty, damp air 304 pits. For deck and quay fittings the grade goes to 316 (Mo 2.0–2.5% · Ni 10.0–13.0%). Handrails and guardrails are made from Ø16–76.1 mm tube, supports from 15×15–80×80 mm profile, guards from sheet. 316 is sourced on request: send the size and quantity.
Typical grade: AISI 316 / EN 1.4401
View details
Mining and Mineral Processing
Damp, dust and acidic process water are hard on plant equipment; 304 (Cr 17.5–19.5% · Ni 8.0–10.5%) for general platform work. On acidic water lines, 316 (Mo 2.0–2.5%). Conveyor platforms and railings are made from 15×15–80×80 mm profile and Ø16–76.1 mm tube, guards and channel covers from sheet. Send the grade and size.
Typical grade: AISI 304 / EN 1.4301 · AISI 316 / EN 1.4401
View details
Home Appliances
For interior panels of white goods and small appliances, 430 is suitable and economical (Cr 16.0–18.0%); on surfaces that meet water and food (dishwasher tubs, washing-machine drums), 304. Bodies and panels are formed from sheet, heater and handle lines run in Ø16–76.1 mm tube. Send the grade, thickness and size.
Typical grade: AISI 430 / EN 1.4016 · AISI 304 / EN 1.4301
View details
